msgbartop
Blog di Bernardino (Dino) Ciuffetti
msgbarbottom

19 Mar 14 TSL2561 light sensor on Raspberry pi in C

After I bought a new TSL2561 digital light sensor from Adafruit, I found that the very cool and small device cannot be accessed directly from linux (rasbian doesn’t have it’s kernel module compiled). Since I didn’t want to cross recompile my whole raspberry pi kernel just to have the tsl2563.ko driver enabled, and since it seems that raspbian does not relase genuine kernel headers to just compile custom kernel modules, I decided to write a user space simple library driver in C.

I found out that Adafruit relases proof of concept libraries written in C++ and python to access its hardware devices, the problem is that the c++ version is ready for arduino but it was not so directly usable for my raspberry pi. It also makes use of an adafruit unified sensor library and other external stuff. Since I am too lazy I decided yesterday to write a new simple library in plain C without external dependencies, just ready for my raspberry pi.

This is the arduino version that inspired me: https://github.com/adafruit/TSL2561-Arduino-Library
This is another cool blog post that inspired me (it now seems dead!!): http://russelldavis.org/2013/03/23/raspberryhunt-part-2/

This is an example:

/* prepare the sensor
(the first parameter is the raspberry pi i2c master controller attached to the TSL2561, the second is the i2c selection jumper)
The i2c selection address can be one of: TSL2561_ADDR_LOW, TSL2561_ADDR_FLOAT or TSL2561_ADDR_HIGH
*/
TSL2561 light1 = TSL2561_INIT(1, TSL2561_ADDR_FLOAT);

/* initialize the sensor */
rc = TSL2561_OPEN(&light1);

/* sense the luminosity from the sensor (lux is the luminosity taken in "lux" measure units)
the last parameter can be 1 to enable library auto gain, or 0 to disable it */
rc = TSL2561_SENSELIGHT(&light1, &broadband, &ir, &lux, 1);

TSL2561_CLOSE(&light1);

Compile:

gcc -Wall -O2 -o TSL2561.o -c TSL2561.c
gcc -Wall -O2 -o TSL2561_test.o -c TSL2561_test.c
gcc -Wall -O2 -o TSL2561_test TSL2561.o TSL2561_test.o

The output is like this:

root@rasponi:~/test/gpio# ./TSL2561_test
Test. RC: 0(Success), broadband: 141, ir: 34, lux: 12

As you can see it’s very easy at this point to get the light measures in C. Just include TSL2561.c and TSL2561.h inside your project and use the public APIs to setup and sense the IC.

I decided to release the code with the liberal apache v2 license, so feel free to include it into your commercial projects if you like.

It’s useful for me, and I hope that it can be useful to you too. Obviously it comes with absolutely no warranty.

p.s.1: I left the hardware stuff out of this article (just attach +vcc, gnd and i2c bus to the sensor
p.s.2: you have to load two kernel modules to get i2c bus working on you Raspberry pi:

modprobe i2c_bcm2708
modprobe i2c_dev

Ciao, Dino.

TSL2561.c
TSL2561.h
TSL2561_test.c

This is an example on how to use all 3 sensors on the same i2c bus:

#include <stdio.h>
#include <string.h>
#include "TSL2561.h"

int main() {
	int i;
	int rc;
	uint16_t broadband, ir;
	uint32_t lux=0;
	TSL2561 lights[3]; // we can handle 3 sensors
	
	// prepare the sensors
	// (the first parameter is the raspberry pi i2c master controller attached to the TSL2561, the second is the i2c selection jumper)
	// The i2c selection address can be one of: TSL2561_ADDR_LOW, TSL2561_ADDR_FLOAT or TSL2561_ADDR_HIGH
	
	// prepare all sensors
	/* cannot assign that way
	lights[0] = TSL2561_INIT(1, TSL2561_ADDR_LOW);
	lights[1] = TSL2561_INIT(1, TSL2561_ADDR_FLOAT);
	lights[2] = TSL2561_INIT(1, TSL2561_ADDR_HIGH);
	*/
	
	// initialize at runtime instead
	// FIRST SENSOR --> TSL2561_ADDR_LOW
	lights[0].adapter_nr=1;						// change this according to your i2c bus
	lights[0].sensor_addr=TSL2561_ADDR_LOW;				// don't change this
	lights[0].integration_time=TSL2561_INTEGRATIONTIME_402MS;	// don't change this
	lights[0].gain=TSL2561_GAIN_16X;				// don't change this
	lights[0].adapter_fd=-1;					// don't change this
	lights[0].lasterr=0;						// don't change this
	bzero(&lights[0].buf, sizeof(lights[0].buf));			// don't change this
	
	// SECOND SENSOR --> TSL2561_ADDR_FLOAT
	lights[1].adapter_nr=1;						// change this according to your i2c bus
	lights[1].sensor_addr=TSL2561_ADDR_FLOAT;			// don't change this
	lights[1].integration_time=TSL2561_INTEGRATIONTIME_402MS;	// don't change this
	lights[1].gain=TSL2561_GAIN_16X;				// don't change this
	lights[1].adapter_fd=-1;					// don't change this
	lights[1].lasterr=0;						// don't change this
	bzero(&lights[1].buf, sizeof(lights[1].buf));			// don't change this
	
	// THIRD SENSOR --> TSL2561_ADDR_HIGH
	lights[2].adapter_nr=1;						// change this according to your i2c bus
	lights[2].sensor_addr=TSL2561_ADDR_HIGH;			// don't change this
	lights[2].integration_time=TSL2561_INTEGRATIONTIME_402MS;	// don't change this
	lights[2].gain=TSL2561_GAIN_16X;				// don't change this
	lights[2].adapter_fd=-1;					// don't change this
	lights[2].lasterr=0;						// don't change this
	bzero(&lights[2].buf, sizeof(lights[2].buf));			// don't change this
	
	// initialize the sensors
	for(i=0; i<3; i++) {
		rc = TSL2561_OPEN(&lights[i]);
		if(rc != 0) {
			fprintf(stderr, "Error initializing TSL2561 sensor %i (%s). Check your i2c bus (es. i2cdetect)\n", i+1, strerror(lights[i].lasterr));
			return 1;
		}
		// set the gain to 1X (it can be TSL2561_GAIN_1X or TSL2561_GAIN_16X)
		// use 16X gain to get more precision in dark ambients, or enable auto gain below
		rc = TSL2561_SETGAIN(&lights[i], TSL2561_GAIN_1X);
		
		// set the integration time 
		// (TSL2561_INTEGRATIONTIME_402MS or TSL2561_INTEGRATIONTIME_101MS or TSL2561_INTEGRATIONTIME_13MS)
		// TSL2561_INTEGRATIONTIME_402MS is slower but more precise, TSL2561_INTEGRATIONTIME_13MS is very fast but not so precise
		rc = TSL2561_SETINTEGRATIONTIME(&lights[i], TSL2561_INTEGRATIONTIME_101MS);
	}
	
	// you can now sense each sensor when you like
	for(i=0; i<3; i++) {
		// sense the luminosity from the sensors (lux is the luminosity taken in "lux" measure units)
		// the last parameter can be 1 to enable library auto gain, or 0 to disable it
		rc = TSL2561_SENSELIGHT(&lights[i], &broadband, &ir, &lux, 1);
		printf("Test sensor %i. RC: %i(%s), broadband: %i, ir: %i, lux: %i\n", i+1, rc, strerror(lights[i].lasterr), broadband, ir, lux);
	}
	
	// when you have finisched, you can close things
	for(i=0; i<3; i++) {
		TSL2561_CLOSE(&lights[i]);
	}
	
	return 0;
}